Post by Daremo on Oct 7, 2012 18:56:41 GMT -5
Step 1. Tools and Supplies:
Small Saw
File/Sandpaper
3/32" Tubing
Step 2. Cut:
Cut a 4 1/2" piece of 3/32" tubing. Sand the ends.
Step 3. Paint:
Now, it's time to paint. I'm using Testors Model Masters Acrylics. First, prime the staff. Then paint the whole thing flat black or a wood color. Once the paint dries, seal it with Testors Glosscote or Dullcote.
Step 4. Detail:
Alternatively, you can add detail like bands to the ends for an Iron Staff. Or for a real challenge add wraps to the staff. Don't forget you can fill the holes with green stuff too.
Small Saw
File/Sandpaper
3/32" Tubing
Step 2. Cut:
Cut a 4 1/2" piece of 3/32" tubing. Sand the ends.
Step 3. Paint:
Now, it's time to paint. I'm using Testors Model Masters Acrylics. First, prime the staff. Then paint the whole thing flat black or a wood color. Once the paint dries, seal it with Testors Glosscote or Dullcote.
Step 4. Detail:
Alternatively, you can add detail like bands to the ends for an Iron Staff. Or for a real challenge add wraps to the staff. Don't forget you can fill the holes with green stuff too.