Post by Daremo on Oct 7, 2012 18:17:44 GMT -5
Step 1. Tools and Supplies:
Small Saw
Sand Paper/File
3/32" Tube
Step 2. Cut:
Take the 3/32" tube and cut 2 sections (1 9/16") with the saw. Using the saw will allow you to avoid any crushing of the tube when you cut it. Sand the ends of the tubes.
Step 3. Paint:
Now, it's time to paint. I'm using Testors Model Masters Acrylics. First, prime the weapon. Then paint the whole thing flat black. Once the paint dries, seal it with Testors Glosscote or Dullcote.
Small Saw
Sand Paper/File
3/32" Tube
Step 2. Cut:
Take the 3/32" tube and cut 2 sections (1 9/16") with the saw. Using the saw will allow you to avoid any crushing of the tube when you cut it. Sand the ends of the tubes.
Step 3. Paint:
Now, it's time to paint. I'm using Testors Model Masters Acrylics. First, prime the weapon. Then paint the whole thing flat black. Once the paint dries, seal it with Testors Glosscote or Dullcote.